Slide background
COPPERSTONE
Configure & Order your
Interchangeable bass guitar preamp
Welcome to the COPPERSTONE Bass Guitar Preamp configurator
Choose between the Basic Configurator or the Advanced Configurator. If you want a standard COPPERSTONE with standard characteristics and with standard frequency setup, then "Basic" is your best option. But if you want a COPPERSTONE with additional modules, custom mid frequency setup or even additional units of COPPERSTONE with different frequency characteristics, then select the advanced configurator.

Learn more about COPPERSTONE

Learn more about COPPERSTONE

Learn more about COPPERSTONE

 CHOOSE YOUR COPPERSTONE

 

  1. BASIC CONFIGURATOR
  2. ADVANCED CONFIGURATOR
1) Chose your COPPERSTONE version

 

COPPERSTONE version*
COPPERSTONE solderless
COPPERSTONE Lite




You have chosen the standard COPPERSTONE solderless configuration:

 

No soldering is necessary
All connections are already made. You will only need to connect the output jack with the terminal connectors (included within this package) and the pickups using a small 0.3x1.8mm screwdriver.

 

This package includes:

1) Interchangeable COPPERSTONE 3 band preamp
2) Base Board for COPPERSTONE with 30-pin connector
3) Integrated wiring cables with a 30-pin connector and terminal connectors for jack output
4) Potentiometers: Master Volume, Blend, Treble, Mid, Bass
5) 3-way mid selector switch with frequency set to 250Hz/500Hz/1000Hz
6) Output jack
7) Battery clip



This package does NOT include:
 Knobs

 

 

 

2) Choose the pickup style you will use with your COPPERSTONE

 

Active or passive pickups
Passive pickups
Active pickups

 

 

3) Additional modules

COPPERSTONE can be expanded with optional modules such as FLAME and PASSIVE TONE.

PASSIVE TONE module allows conventional passive tone control on your instrument as used on passive instruments. You can combine both active EQ and PASSIVE TONE in order to get your desired sound.

 

ACTIVE/PASSIVE Switch module connect and disconnect active EQ of COPPERSTONE. In passive mode active equalization is disconnected but you can use passive tone module to control tonality of your instrument. In active mode both active and passive tone works alltogether.
 

FLAME is a discreet subminiature electronic device that monitors your battery status and flash when the battery drops its voltage below the desired level. Due to its extremely reduced size, FLAME easily fits in any bass guitar's electronics cavity.

 

 

PASSIVE TONE module*
Yes, I want the PASSIVE TONE module
No, just COPPERSTONE, please


ACTIVE/PASSIVE Switch*
Yes, I want the ACTIVE/PASSIVE Switch module
No, just COPPERSTONE, please

 

 

 

FLAME module*
Yes, I want the FLAME module
No, just COPPERSTONE, please

 

 

Great, you are almost done.
Click the "Next step" button below
to go to the next page.

 

 

 

Back Next Save Progress
1) Choose your advanced COPPERSTONE version
Advanced interchangeable COPPERSTONE version*
COPPERSTONE solderless version
COPPERSTONE solderable version




You have chosen the standard COPPERSTONE solderless configuration:

 

No soldering is necessary
All connections are already made. You will only need to connect the output jack with the terminal connectors (included within this package) and the pickups using a small 0.3x1.8mm screwdriver.

 

This package includes:

1) Interchangeable COPPERSTONE 3 band preamp
2) Base Board for COPPERSTONE with 30pin connector
3) Integrated wiring cables with a 30pin connector and terminal connectors for jack output
4) Potentiometers: Master Volume, Blend, Treble, Mid, Bass
5) 3-way mid selector switch with frequency set to 250Hz/500Hz/1000Hz
6) Battery clip



This package does NOT include:
 Knobs
 Output jack

 




You have chosen the standard COPPERSTONE soldering configuration:

 

Minor soldering is necessary
All connections are already made but you will have to solder the output jack and the pickups.


This package includes:

1) Interchangeable COPPERSTONE 3 band preamp
2) Base Board for COPPERSTONE with 30pin connector
3) Integrated wiring cables with a 30pin connector and terminal connectors for jack output
4) Potentiometers: Master Volume, Blend, Treble, Mid, Bass
5) 3-way mid selector switch with frequency set to 250Hz/500Hz/1000Hz
6) Battery clip

This package does NOT include:
 Knobs
Output jack

 

 

 

2) Choose the pickup style you will use with your COPPERSTONE

 

Active or passive pickups
Passive pickups
Active pickups

 

 


3) Do you need an Output Jack?

Jack*
Yes, I a need an Output Jack
No, I already have one
Choose your Output Jack type*
Standard jack
Tube jack

 

 


4) Configure the medium frequency selector

Medium frequency option*
Without selector (fixed frequency @500Hz)
Standard 250Hz/500Hz/1000hz
Choose from available presets
Configure your own


 

Choose from presets
200Hz/400Hz/800Hz
200Hz/400Hz/1000Hz
250Hz/400Hz/800Hz
250Hz/400Hz/1000Hz
300Hz/600Hz/800Hz
300Hz/600Hz/1000Hz
Lower frequency center*
Mid frequency center*
High frequency center*
Please confirm frequency for COPPERSTONE without selector
Yes, 500Hz
I want a different frequency
Choose your own*

 

 

5) Would you like to order a second COPPERSTONE?

The great advantage of COPPERSTONE is its interchangeability. Order your second COPPERSTONE with a different mid frequency set and expand your tone even further.

Second unit of COPPERSTONE*
Yes, I want a second unit of COPPERSTONE for just
No, thank you
Have you ordered a selector in the step 4?
No, I have ordered my first COPPERSTONE without selector
Yes, I have ordered a selector and I want to choose 3 frequencies for my second COPPERSTONE

 

Please choose 3 mid frequency centers for your second COPPERSTONE

REMEMBER: Choose frequencies different from the frequencies of your first COPPERSTONE ordered in the step 4
 
Lower frequency center*
Mid frequency center*
High frequency center*



Please choose one fixed frequency for your second COPPERSTONE

One fixed frequency

 

 

3) Additional modules

 

COPPERSTONE can be expanded with optional modules such as FLAME and PASSIVE TONE.

PASSIVE TONE module allows conventional passive tone control on your instrument as used on passive instruments. You can combine both active EQ and PASSIVE TONE in order to get your desired sound.

 

ACTIVE/PASSIVE Switch module connect and disconnect active EQ of COPPERSTONE. In passive mode active equalization is disconnected but you can use passive tone module to control tonality of your instrument. In active mode both active and passive tone works alltogether.

 

FLAME is a discreet subminiature electronic device that monitors your battery status and flash when the battery drops its voltage below the desired level. Due to its extremely reduced size, FLAME easily fits in any bass guitar's electronics cavity.

 

 

 

 

PASSIVE TONE module*
Yes, I want the PASSIVE TONE module
No, just COPPERSTONE, please


ACTIVE/PASSIVE Switch module*
Yes, I want the ACTIVE/PASSIVE Switch module
No, just COPPERSTONE, please

 

 

 

FLAME module*
Yes, I want the FLAME module
No, just COPPERSTONE, please

 

 

Great, you are almost done.
Click the "Next step" button below
to go to the next page.

 

 

Great, you are almost done.
Click the "Next step" button below
to go to the next page.

 

 

 

Back Next Save Progress